Main Menu
Transmission
Reassembly
b. Lower the transmission housing, then place the
shift arm in the groove of the shift piece by turn-
ing the shift lever.
TRANSMISSION HOUSING
SHIFT
ARM
c. Check the operation of the shift lever.
Table of Contents
SHIFT LEVER
SHIFT PIECE
13. Lower the transmission housing with snap ring
pliers, and set the snap ring in the groove of the
countershaft bearing.
SNAP RING
14. Check that the snap ring is securely seated in the
groove of the countershaft bearing.
Dimension A as installed: 1.60—8.15 mm
COUNTERSHAFT
BEARING
(0.063-0.321 in)