Main Menu
5. Disconnect the 18-P and 10-P connectors.
CAUTION: Be careful not to damage the SRS wire
harness.
6.
Remove the six screws, then remove the headlight-
turn signal switch assembly.
HEADLIGHT SWITCH
18-P CONNECTOR
7.
If necessary, remove the turn signal cancel unit and
cancel switch.
TURN SIGNAL
CANCEL UNIT
Table of Contents
10-P CONNECTOR
TURN SIGNAL SWITCH
TURN SIGNAL
CANCEL SWITCH
8.
If necessary, remove the headlight switch bulb.
HEADLIGHT SWITCH
BULB (0.91 W)