Table of Contents
Advertisement
Main Menu
15. Let the adhesive dry for at least one hour, then
spray water over the windshield and check for
leaks. Mark leaking areas and let the windshield
dry, then seal with urethane windshield adhesive.
NOTE:
• Let the car stand for at least four hours after
windshield installation. If the car has to be used
within the first four hours, it must be driven
slowly.
• Keep the windshield dry within the first hour
after installation.
• Check that the ends of the front pillar retainer
are set under the air scoop.
16. Reassemble all removed parts.
Table of Contents
- Quick Links:
- Table of Contents
Hide quick links:
Advertisement
Table of Contents
