Main Menu
Lighting System
Retractor Motor Replacement
CAUTION:
• Halogen headlights can become very hot in use; do
not touch them or the attaching hardware immediately
after they have been turned off.
• Do not try to replace or clean headlights with the lights
on.
1.
Remove the No. 42 (15 A) and No. 43 (15 A) fuses
from the under-hood fuse/relay box.
UNDER-HOOD FUSE/RELAY BOX
2.
Turn the knob clockwise to raise the headlight.
Table of Contents
3.
CAP
4.
No. 43 (15A)
FUSE
No. 42 (15A)
FUSE
HEADLIGHT HOUSING
5.
CAP
KNOB
6.
Remove the two caps, four screws, and cowl clips.
COWL CLIP
SCREW
Slide the headlight housing forward and up.
NOTE: Be careful not to damage the front bumper
or the headlight housing.
Disconnect the 6-P connector from the headlight
unit.
6-P CONNECTOR
HEADLIGHT UNIT
Remove the four mounting bolts, then remove the
unit.
PROTECTIVE TAPE
MOUNTING
BOLTS