Acura NSX 1991 Manual page 349

Main Menu
9. Install the reverse shift arm.
6 x 1.0 mm SPECIAL BOLTS
15 N-m (1.5 kg-m, 11 Ib-ft)
10. Apply liquid gasket to the surface of the transmis-
sion housing mating with the clutch housing as
shown.
NOTE:
• Use liquid gasket (P/N 08718-0001).
• Remove any dirt or oil from the sealing surface.
• Seal the entire circumference of the bolt holes to
prevent oil leakage.
• If 20 minutes have passed after applying liquid
gasket, reapply it and assemble the housings.
• After assembly, wait at least 30 minutes before
refilling with oil.
Table of Contents
REVERSE SHIFT ARM
11. Install the dowel pins on the clutch housing.
12. Place the transmission housing over the clutch
housing, being careful to line up the shafts.
NOTE: Make sure the 3rd/4th shift fork shaft col-
lar mates with the 3rd/4th shift fork shaft.
3RD/4TH SHIFT FORK SHAFT COLLAR
TRANSMISSION
HOUSING
DOWEL PINS
a. Place the shift lever as a shown.
Neutral
position.
SHIFT ARM
SHIFT PIECE
TRANSMISSION
HOUSING
CLUTCH HOUSING
SHIFT LEVER