Acura NSX 1991 Manual page 310

Main Menu
Transmission Housing
Removal
NOTE: Place the clutch housing on two pieces of wood
thick enough to keep the mainshaft from hitting the
workbench.
1. Remove the back-up light switch, neutral position
switch, differential speed sensor and vehicle speed
sensor (VSS).
VSS
(O-RING Replace.)
DIFFERENTIAL
SPEED SENSOR
2. Remove the sealing bolts, springs and steel balls.
3. Remove the transmission housing attaching bolts
in a crisscross pattern in several steps.
4. Remove the 36 mm sealing bolt.
SPRING
(L. 25 mm)
ATTACHING
BOLT
Table of Contents
NEUTRAL
POSITION
SWITCH
BACK-UP LIGHT SWITCH
.14 mm SEALING BOLT
36 mm SEALING BOLT
STEEL BALL (3/8 in)
SPRING
(L. 24.2 mm)
12 mm SEALING
BOLT
STEEL
BALLS (5/16 in)
16 mm SEALING
BOLT COMP
5. Expand the snap ring on the countershaft ball bear-
ing, and remove it from the groove using a pair of
snap ring plier.
6. Separate the clutch housing from the transmission
housing.
7. Remove the thrust shim and oil guide plate from the
transmission housing.
TRANSMISSION HOUSING
SNAP RING PLIER
SNAP RING
THRUST SHIM
OIL GUIDE
PLATE