Acura NSX 1991 Manual page 781

Main Menu
Radiator and Condenser Fan Controls
Control Unit Terminals
THROTTLE VALVE CONTROL
MOTOR RELAY
Wire
Terminal Color
Table of Contents
FAN CONTROL
UNIT
Connects to
Radiator Fan Resistor Test
1. Disconnect the 3-P connector from the resistor.
3-P CONNECTOR
2. Using an ohmmeter, measure resistance between
the A and B terminals. Replace the resistor if the
resistance is not within specifications.
NOTE: Resistance will vary with the resistor
temperature; specifications are at 68°F (20°C).
Radiator Fan Resistor
Resistance: 0.54—0.66 ohms
RADIATOR
FAN
RESISTOR
NOT USED