Acura NSX 1991 Manual page 143

Main Menu Table of Contents
Crankshaft
1.
2.
3.
4.
Installation
Before installing the crankshaft, apply a coat of
engine oil to the main bearings and
bearings.
Insert bearing halves in the engine block and con-
necting rods.
Lower the crankshaft into the block.
Install the thrust washers on the No. 3 journal. Oil
thrust washer surfaces.
Install the bearings and caps. Tighten 9 x 1.25 mm
cap bolts to the specified torque.
rod