Acura NSX 1991 Manual page 391

Main Menu
Inspection
: Thoroughly pack the inboard joint and
outboard joint with joint grease included in the new
joint boot set.
Check splines for wear and damage.
Check inside bore for wear.
Inspect for cracks.
SET RING
Replace.
DRIVESHAFT
INBOARD JOINT
SPIDER
NOTE: Stagger the inboard joint spider and
outboard joint spider 60° apart. To ease
assembly, mark alignment
driveshaft and spiders before disassembl-
ing them.
Table of Contents
INBOARD JOINT
Pack cavity
with grease.
SET RING
INBOARD
JOINT
SPIDER
BOOT BAND
Replace.
SET RING
OUTBOARD
JOINT
SPIDER
CIRCLIP
ROLLER
Inspect for faulty movement and wear.
marks on
Grease Quantity:
NOTE: Mark the rollers and roller grooves during
disassembly to ensure proper positioning during
reassembly.
ROLLER
Inspect for faulty movement and wear.
SET RING
INBOARD BOOT
Inspect for cracking,
splitting and wear.
BOOT BANDS
Replace.
OUTBOARD
JOINT
SPIDER
SET RING
Section AA
OUTBOARD BOOT
Inspect for cracking,
splitting and wear.
BOOT BAND
Replace.
OUTBOARD JOINT
Check splines for wear and damage.
CAP
Check inside bore for wear.
Inspect for cracks.
SPRING
Spline
direction
HOLDER