Acura NSX 1991 Manual page 511

Main Menu
Rear Caliper
Disassembly (cont'd)
12. Remove the adjusting bolt.
13. Remove the spring cover, adjusting spring B,
spacer, bearing A and cup from the adjusting bolt.
14. Remove the sleeve piston, and remove the pin from
the cam.
Table of Contents
1 5. Remove the return spring.
16. Remove the parking lever and cam as an assembly
from the caliper body.
CAUTION: Do not loosen the parking nut with the
cam installed in the caliper body. If the lever and
shaft must be separated, hold the lever in a vise
and loosen the parking nut.
17. Remove the cam boot.