Main Menu
8. Check for continuity between the horn positive ter-
minal and the steering column shaft with the horn
switch pressed. There should be no continuity.
STEERING COLUMN SHAFT
• If there is continuity, replace the cable reel (see
section
24).
• If there is no continuity, go to step 9.
9. Remove the nut and the four screws, then remove
the steering wheel cover, and replace the horn
switch.
STEERING WHEEL
COVER
10. Reinstall the steering wheel and the airbag (see
section
24).
Table of Contents
POSITIVE TERMINAL
STEERING WHEEL NUT
50 N-m (5.0 kg-m, 36 Ib-ft)
Replace.