Acura NSX 1991 Manual page 305

Main Menu
12. Remove the parking brake cable holders from the rear beam rod.
13. Remove the rear beam rod.
14. Remove the front exhaust pipe A.
Corrosion resistant bolt/nut
SELF-LOCKING NUT
Replace.
EXHAUST
PIPE A
GASKET
Replace.
REAR BEAM ROD
1 5. Remove the parking brake cable holder and the wheel sensor wire clamp.
16. Remove the bolt, and separate the toe control arm from the side beam (see
17. Remove the damper fork bolt (see
18. Remove the bolts, and separate the lower control arm from the side beam (see
19. Pry the driveshaft out of the differential. Pull and remove it.
Corrosion resistant bolt/nut
PARKING BRAKE
CABLE HOLDER
FLANGE BOLT
SIDE BEAM
TOE CONTROL ARM
SELF-LOCKING NUT
Replace.
Table of Contents
GASKET
Replace.
SELF-LOCKING NUT
Replace.
section 18).
SELF-LOCKING NUT
Replace.
ADJUSTING
CAM
DRIVESHAFT ADJUSTING BOLT
PARKING BRAKE
CABLE HOLDERS
section
section
DAMPER FORK BOLT
WHEEL SENSOR
WIRE CLAMP
LOWER CONTROL
ARM
SELF-LOCKING NUT
Replace.
18).
18).