Acura NSX 1991 Manual page 721

Main Menu
Compressor
Clutch Overhaul
1. Remove the center bolt while holding the pressure
plate.
A/C CLUTCH HOLDER
Commercially available
Robinair: P/N 10204
Kent-Moore: P/N J37872
2. Remove the pressure plate and shim(s), taking care
not to lose the shims.
Table of Contents
CENTER BOLT
12 N-m (1.2 kg-m, 9 Ib-ft)
PRESSURE
PLATE
SHIM(S)
3. Use snap ring pliers to remove snap ring B, then
remove the pulley.
NOTE:
• Be careful not to damage the pulley and com-
pressor during removal/installation.
• Once the snap ring B was removed, replace it
with a new one.
SNAP RING B
Replace.
PULLEY