Acura NSX 1991 Manual page 659

Main Menu
Front Pillar Seal/Retainer
Replacement
15. Install the hook stop on each side.
NOTE: Do not press on the seal yet to make the adhe-
sive stick.
Nut locations, 4
6 x 1.0 mm
11 N-m (1.1 kg-m,
8 Ib-ft)
HOOK STOP
16. Install each pillar portion of the front pillar seal into
the front pillar retainer as shown, then attach the clips.
NOTE:
• Do not press on the seal yet to make the adhe-
sive stick.
• After setting the lip at location
pillar seal while pushing the lip in the front pillar
retainer with a rounded plastic spatula at location
FRONT PILLAR
RETAINER
FRONT PILLAR
SEAL
(Pillar portion)
Table of Contents
install the front
LIP
LIP
Clip locations, 6
FRONT PILLAR
RETAINER
17. Install the roof portion of the front pillar seal into the
retainer on the roof rail.
NOTE:
• Do not press on the seal yet to make the adhe-
sive stick.
• Install the roof portion in the same way as the pil-
lar portion.
• Before installing the roof portion of the front pil-
lar seal, lubricate the lips with soapy water.
BUTYL
TAPE
RETAINER
FRONT PILLAR
SEAL
PLASTIC
SPATULA
FRONT PILLAR
SEAL
(Roof portion)
LIPS
Apply soapy
water.