Acura NSX 1991 Manual page 148

Main Menu
Engine Lubrication
Illustrated Index
FRONT CYLINDER
HEAD
DOWEL PIN
6 x 1.0 mm
12 N-m (1.2 kg-m, 9 Ib-ft)
WATER PASS PIPE
ENGINE OIL
COOLER
8 x 1.25 mm
22 N-m (2.2 kg-m
16 Ib-ft)
Replace.
ENGINE OIL
PRESSURE
SWITCH
OIL FILTER BASE
Illustrated Index,
page 8-12
OIL FILTER
One turn or
22 N-m (2.2 kg-m,
16 Ib-ft)
Replacement 8-5
Table of Contents
ENGINE OIL PRESSURE GAUGE
SENDING UNIT
22 N-m (2.2 kg-m. 16 Ib-ft)
8 x 1.25 mm
12 N-m (2.2 kg-m,
16 Ib-ft)
O-RINGS
Replace.
SPECIAL BOLTS
8 x 1.25 mm
22 N-m (2.2 kg-m,
16 Ib-ft) O-RINGS
Replace. Replace.
OIL PASS
PIPE
6 x 1.0 mm
12 N-m
(1.2 kg-m, 9 Ib-ft)
DRAIN PLUG
20 x 1.5 mm
45 N-m (4.5 kg-m, 33 Ib-ft)
NOTE:
• Use new O-rings when reassembling.
• Apply oil to O-rings before installation.
• Use liquid gasket, Part No. 08718-0001.
• If the bottom of the oil pan is deformed, it should be
repaired or the oil pan should be replaced to retain
proper clearance
bottom.
OIL CONTROL ORIFICE
Remove with 6 mm
bolt and clean.
DOWEL PINS
SPECIAL BOLTS
6 x 1.0 mm
12 N-m
(1.2 kg-m, 9 Ib-ft)
Replace.
WASHER
Replace.
between the screen and
O-RING
Replace.
OIL PUMP
Illustrated index, page 8-7
Inspection, page 8-8
Apply liquid gasket to
mating surface of engine block.
OIL PAN GASKET
OIL
Replace.
SCREEN
OIL PAN
• Do not deform
the bottom.
Refer to page
when installing.
6 x 1.0 mm
12 N-m
(1.2 kg-m, 9 Ib-ft)
6 x 1.0 mm
14 N-m (1.4 kg-m, 10 Ib-ft)
the
8-10