Acura NSX 1991 Manual page 400

Main Menu
Intermediate Shaft
Reassembly
1. Press the intermediate shaft bearing into the bear-
ing support using the special tools.
HUB DIS/ASSEMBLY
BASE
07GAF-SD40700
2. Seat the internal circlip in the groove of the bearing
support.
CAUTION: Install the circlip with the radiused side
facing out.
INTERNAL CIRCLIP
Table of Contents
Press
DRIVER
07749-0010000
OIL SEAL DRIVER
07GAD-PG40100
BEARING
Replace.
3. Press the intermediate shaft inner seal into the
bearing support using the special tools.
Press
SEAL DRIVER
ATTACHMENT
07JAD-SH3010A
HUB DIS/ASSEMBLY
BASE
07GAF-SD40700
4. Press the intermediate shaft into the shaft bearing
using the special tools.
HUB ASSEMBLY GUIDE
ATTACHMENT
07GAF-SE00200
Fit the inner race
of the bearing.
DRIVER
07749-0010000
INNER SEAL
Replace.
Press
INTERMEDIATE SHAFT
HUB DIS/ASSEMBLY BASE
07GAF-SD40700