Acura NSX 1991 Manual page 670

Main Menu
Seals/Retainers Alignment
Adjustment
Rear:
ROOF
ROOF SIDE
RETAINER
ROOF SIDE
SEAL
12. Tighten the roof side lock unit mounting nuts and
lock receiver mounting bolts.
13. If you need to adjust the rear end of the roof side seal
to fit against the rear pillar seal, remove the roof,
then adjust the rear end of the roof side seal with a
shim.
NOTE:
• Remove the rear end of the roof side seal, then
install the shim.
• Install the roof side seal securely as described on
page 20-85.
SHIM
Thickness:
1.6 mm (0.063 in)
Table of Contents
REAR PILLAR
PANEL
REAR PILLAR
SEAL
ROOF SIDE
SEAL
14. Check the height of the roof with the body.
If necessary, loosen the lock receiver mounting bolts,
then adjust the height of the roof to make the roof fit
flush with the body by using shims.
Thickness: 1.0 mm (0.039 in)
Front:
Rear:
REAR LOCK
RECEIVER
15. Tighten the lock receiver mounting bolts.
FRONT LOCK
RECEIVER