Acura NSX 1991 Manual page 625

Main Menu
Opener/Latch
Replacement
NOTE: Take care not to bend the cables.
Rear Hatch Opener/Latch:
REAR HATCH
OPENER CABLE
Disconnect the rear
hatch opener cable.
Replacement, see page 20-67
MOUNTING BOLTS
x
* 6 1.0 mm
10 N·m (1.0 kg-m,
7.2 Ib-ft)
HANDLE ROD
Coupe:
RETAINER
CLIP
REAR SIDE TRIM PANEL
Removal, see page
Fuel Lid Opener/Latch:
MOUNTING BOLTS
*
6 x 1.0 mm
10 N·m (1.0 kg-m,
7.2 Ib-ft)
OPENER KNOB
Table of Contents
LATCH SWITCH
Be careful not to damage
the latch switch. Discon-
nect the latch switch
connector.
OPENER
NSX-T (open top):
RETAINER
CLIP
20-38
FUEL LID
OPENER CABLE
FUEL LID
OPENER CABLE
Replacement, see page
OPENER
To remove the opener,
pull out the opener knob and
remove the side sill pad
and trim (see page 20-38
REAR HATCH
LATCH
RELEASE HANDLE
REAR HATCH
Pull out the retainer clip.
OPENER CABLE
then remove the release
Disconnect the rear hatch
handle and rear aide trim
opener cable.
panel.
FUEL LID
After installing, check tor
a flush fit with the body.
MOUNTING BOLTS
*6 x 1.0 mm
13 N·m (1.3 kgm, 9 lb-ft)
20-67
LATCH SWITCH
CONNECTOR
MOUNTING BOLTS
*6 x 1.0 mm
10 N·m (1.0 kg-m, 7.2 lb-ft)
FUEL LID LATCH
Lower the rear inner
fender and remove the
fuel lid latch by turning
it
90°.
FUEL LID LATCH FUEL LID
Push and turn the fuel lid
latch to make the fuel lid
fit flush with the body.