Acura NSX 1991 Manual page 601

Main Menu
Seat Belts
Replacement (cont'd)
Anchor bolt construction:
PLAIN
WASHER
* UPPER ANCHOR BOLT
SPRING WASHER
* CENTER ANCHOR BOLT
3. Check that the retractor locking mechanism functions as described on page
4. Installation is the reverse of the removal procedure.
NOTE:
Make sure you assemble the washers on the anchor bolts as shown.
Before attaching the center pillar trim panel, make sure there are no twists or kinks in the seat belts.
On reassembly, replace the anchor bolts (*) and use liquid thread lock.
Table of Contents
TOOTHED
LOCK WASHER
BEARING
TOOTHED
LOCK WASHER
SPRING WASHER
TOOTHED
LOCK WASHER
* LOWER ANCHOR BOLT
RETRACTOR BOLT
SPRING WASHER
20-45('93-'96) ('91-'92).