Acura NSX 1991 Manual page 351

Main Menu
1 5. Tighten the transmission housing attaching bolts in
a crisscross pattern in several steps as shown below.
Torque: 45 N-m (4.5 kg-m, 33 Ib-ft)
16. Install the 36 mm sealing bolt.
NOTE: Apply liquid gasket (P/N 08718-0001) to
the threads.
17. Install the steel balls, springs, and sealing bolts.
NOTE: Apply liquid gasket (P/N 08718-0001) to
the threads, but don't plug the hole with liquid
gasket.
14 x 1.0 mm SEALING BOLT
33 N-m (3.3 kg-m, 24 Ib-ft)
STEEL BALL
SPRING (L. 25 mm)
(3/8 in)
STEEL BALL
(5/16 in)
Table of Contents
36 mm SEALING BOLT
35 N-m (3.5 kg-m, 25 Ib-ft)
SPRING
(L. 24.2 mm) 12 x 1.0 mm
SEALING BOLT
22 N-m (2.2 kg-m,
16 Ib-ft)
16 x 1.0 mm
SEALING
BOLT COMP
42 N-m
(4.2 kg-m, 30 Ib-ft)
18. Install the back-up light switch and neutral position
switch.
NOTE: Apply liquid gasket (P/N 08718-0001) to
the threads.
19. Install the differential speed sensor and vehicle speed
sensor (VSS).
VSS
(O-RING Replace.)
DIFFERENTIAL
SPEED SENSOR
NEUTRAL POSITION
SWITCH
25 N-m (2.5 kg-m,
18 Ib-ft)
BACK-UP LIGHT SWITCH
25 N-m (2.5 kg-m, 18 Ib-ft)
A: 8 x 1.25 mm
24 N-m (2.4 kg-m, 17 Ib-ft)
B: 8 x 1.25 mm
26 N-m (2.6 kg-m, 19 Ib-ft)
C: 6 x 1.0 mm
12 N-m (1.2 kg-m, 9 Ib-ft)