Acura NSX 1991 Manual page 399

Main Menu
Index/Inspection
CAUTION:
• The bearing support and support base are made of aluminum. Be careful not to damage them when servicing.
• The bearing support and support base are fitted and must be replaced as an assembly.
Corrosion resistant bolt/nut
SUPPORT BASE
Check for damage.
INTERMEDIATE SHAFT RING
Check for damage and distortion.
BEARING SUPPORT RING
Check for damage and distortion.
Table of Contents
INTERMEDIATE SHAFT
FLANGE BOLT
8 x 1.25 mm
22 N-m
(2.2 kg-m, 16 Ib-ft)
INNER SEAL
Replace.
(3-4 g)
Pack the interior of the
inner seal.
BEARING SUPPORT
Check for damage.
INTERMEDIATE SHAFT BEARING
Replace.
OUTER SEAL
Replace.
(5-6 g)
Pack the interior of the
outer seal.
EXTERNAL CIRCLIP
INTERNAL
CIRCLIP
SET RING
Replace.