Acura NSX 1991 Manual page 628

Main Menu
NOTE:
• Take care not to twist the side sill panel.
• Take care not to scratch the body and related parts.
Disassemble in numbered sequence.
Clip locations
NOTE: Loosen the screw,
then remove the clip using
a clip remover.
Side sill panel and side step panel removal:
FRONT INNER
FENDER
Table of Contents
Clip locations
SIDE CLIP (9)
Remove the clips by turning
them 45°.
SIDE STEP PANEL
SIDE CLIP
I NOTE: When removing the side sill
panel, the clips will stay in the body.
SIDE SILL PANEL
Remove the side sill panel by
sliding it forward.
To install the side sill panel, remove the clips from the
body, install them on the panel, then install the panel on
the car.
NOTE: If necessary, replace any damaged clips.
SIDE SILL
PANEL
REAR INNER FENDER