Main Menu
Differential
Disassembly
1. Hold the differential in a bench vise using a special
tool, then remove the differential housing mounting
bolts in a crisscross pattern in several steps.
DIFFERENTIAL
INSPECTION TOOLS
07MAJ-PR90100
2.
Remove the differential housing, stopper plate,
washer, thrust needle bearing, and 65 mm shim.
WASHER
65 mm SHIM
Table of Contents
BENCH VISE
DIFFERENTIAL
HOUSING
STOPPER
PLATE
THRUST NEEDLE
BEARING
3.
Remove the 112 mm shim, clutch discs, clutch
plates, and 102 mm washer.
CLUTCH PLATES
4.
Remove the parts shown below.
WASHERS
65 mm SHIM
112 mm
SHIM
CLUTCH DISCS
102 mm WASHER
CARRIER
ASSEMBLY
THRUST NEEDLE
BEARING
CENTRAL GEAR
THRUST NEEDLE
BEARING
112 mm SHIM
CLUTCH DISC
-SPRING
PLATE