Analyzing Sessions; Enable Options - Weinmann MEDUCORE Standard2 Instructions For Use Manual

Result The session data/status log are located on the SD card.

5.13 Analyzing sessions

You can analyze and archive device session data using the
DEFIview WM 45120 PC software.
1. Remove the SD card
2. Insert the SD card into a PC's SD card slot.
3. To import, analyze or archive session data: Follow the

5.14 Enable options

Requirement •
•
1. Switch on the device
2. Call up the operator menu with the menu key
3. Select System settings | Enable options | Enter enable
4. Enter the enable code for the new option.
5. Activate/deactivate a new option with a checkmark.
Result A new option is enabled for use and activated/deactivated.
74).
Instructions for Use for the PC software.
The device is switched off.
There is an enable code for a new option.
76).
The start menu appears.
(see "8.1 Navigating the operator menu", page
code.
The new option appears as a selection under
System settings | Enable options.
(see "4.8.2 Removing the SD card", page
(see "5.1 Switching the device on", page
MEDUCORE Standard
5 Operation
and enable
117).
2
EN 101