Hyundai HIMSEN H21/32 Instruction Book page 215

Crankshaft
크랭크 샤프트
PERMISSIBLE LIMITS
THE PERMISSIBLE DEFLECTION OF CRANKSHAFT
For the crank nearest
the flywheel
(Cold Condition)
For the other cranks
(Cold Condition)
* The values measured under hot condition are only for reference due to the following reason;
- If the values measured under cold condition satisfy the above mentioned specification, we
guarantee any values measured under hot condition.
MEASURING POSITIONS AND POINTS
Gauge location on crank webs
** If the deflection value is over the above specifications, you should contact the engine
maker immediately.
Maintenance Procedure
Unless otherwise stated the values refer to cold engine.
New or recently overhauled engine,
Operating engine, contact engine maker
(check alignment immediately)
New or recently overhauled engine,
Operating engine, check alignment
HYUNDAI HEAVY INDUSTRIES CO., LTD
정비점검 절차
permissible
permissible
immediately
Each pin location (viewed from the front end)
Turn Counterclockwise
. Engine & Machinery Division
Page
H21/32
3/3
Section No. Rev.
M33100 1E
[unit : 1 / 100 mm]
-26 ~ +12
-28 ≥ or +17 ≤
-13 ~ +13
-15 ≥ or +15 ≤
08.03/CJC