Lan.trigger[N].Clear() - Keithley 2657A Reference Manual

Section 7: TSP command reference
Also see
lan.lxidomain

lan.trigger[N].clear()

lan.trigger[N].mode
lan.trigger[N].overrun
lan.trigger[N].stimulus
lan.trigger[N].wait()
Understanding hardware value and pseudo line state
lan.trigger[N].clear()
This function clears the event detector for a trigger.
Type TSP-Link accessible
Yes
Function
Usage
lan.trigger[N].clear()
N
Details
The trigger event detector enters the detected state when an event is detected. This function clears a trigger
event detector and discards the previous history of the trigger packet.
This function clears all overruns associated with this LAN trigger.
Example
lan.trigger[5].clear()
Also see
lan.trigger[N].assert()
lan.trigger[N].overrun
lan.trigger[N].stimulus
lan.trigger[N].wait()
7-126
Model 2657A High Power System SourceMeter® Instrument Reference Manual
(on page 7-117)
(on page 7-126)
(on page 7-130)
(on page 7-131)
(on page 7-132)
(on page 7-134)
Affected by
The LAN event number to clear (1 to 8)
(on page 7-125)
(on page 7-131)
(on page 7-132)
(on page 7-134)
(on page 3-50)
Where saved Default value
Clears the event detector with LAN packet 5.
2657A-901-01 Rev. B/December 2012