Operation; Bth / Bluetooth Handset; Btc / Bluetooth Cradle; Using A Headset - NEC ux5000 Hardware Manual

.
* Bluetooth will be available for IP-CTS and
For specifications, refer to
4.15.5.1

Operation

4.15.5.1.1 BTH / Bluetooth Handset:

4.15.5.1.2 BTC / Bluetooth Cradle:

4.15.5.1.3 Using a Headset:

Chapter 4
Figure 4-28: BLUETOOTH CORDLESS HANDSET
Option Compatibility
IP Terminal
IP-CTS Enhanced
NA NA
IP Enhanced in a future software release.
UX5000 SYSTEM SPECIFICATIONS
Display: Supports 20 characters/2 line display. Icons indicate antenna strength and
battery level. The handset's display contrast is adjusted using the volume up/down keys
on the handset. Use the volume up/down keys on the terminal for the terminal's display.
Music on Hold: Music is provided by the UX5000 system for keysets or from the IP
terminal.
Volume Control: The volume for handset is adjusted using the BTH's cursor key.
Charging: Built-in battery charger. To recharge the handset, place the handset on the
Bluetooth Cradle.
Outgoing Call: Push the TALK button on the Bluetooth headset and dial the telephone
number.
Incoming Call: Push the TALK button. Ringing is provided by the BTC.
Adjust the Volume: Press the Volume button on the terminal.
Chapter 4 - Terminals and Optional Equipment
Digital Keyset
Value Enhanced
NA ✔
(page 6-1).
Value
NA
4 - 53