Issue 3.0
Figure 5-3 Connecting the DLC Using Twisted 2-Pair Cable
chassis connected with each of the multiline terminals and single line telephones by a
separate twisted 1-pair cable or 2-pair cable (only for multiline terminals).
Refer to the following tables for cabling requirements and specifications:
5 - 8
DLC
Figure 5-3 Connecting the DLC Using Twisted 2-Pair Cable
Table 5-4 DT300 Series Loop Resistance and Cable Length
Table 5-5 DT700 Series Loop Resistance and Cable Length
term
Table 5-6 D
Series i or D
Table 5-7 Cable Connection Between the Analog Port and the Single Line
Equipment
Table 5-8 Cabling Requirements
Table 5-4 DT300 Series Loop Resistance and Cable Length
Terminal or Adapter
DTL-2E-1 (BK) TEL
DTL-6DE-1 (BK) TEL
DTL-8LD-1 (BK) TEL
DTL-8LD-1 (WH) TEL
DTL-12BT-1 (BK) TEL
DTL-12PA-1 (BK) TEL
DTL-12D-1 (BK) TEL
DTL-12D-1 (WH) TEL
DTL-24D-1(BK) TEL
DTL-24D-1(WH) TEL
Twisted 2-Pair Cable
term
IP Terminal Loop Resistance and Cable Length
By Twisted
1-Pair Cable
(without AC
Adapter)
24 AWG
1,969 ft (600m)
1,969 ft (600m)
1,969 ft (600m)
1,969 ft (600m)
1,969 ft (600m)
1,969 ft (600m)
1,969 ft (600m)
UNIVERGE SV8100
is a diagram of the
RJ-11
Multiline Terminal
Hardware Specifications