Installing The Short-Term Battery Box In The 9.5" Chassis-B - NEC UX5000 Hardware Manual

Chapter 1 - Installing the Chassis
1.6.1.1

Installing the Short-Term Battery Box in the 9.5" Chassis-B

1.
2.
3.
4.
5.
1 - 18
Make sure the chassis is powered off and unplugged.
On the battery box compartment, remove the 2 screws under the battery box then remove the
top cover.
Remove cover after
removing screws
Figure 1-18: REMOVE SCREWS AND TOP COVER
Remove the metal support bracket.
Insert the 2 short-term batteries.
Figure 1-19:
Place the battery cable on top of the batteries and adjust it to take up the extra length. Allow
enough length for the connections to be made to the equipment.
Remove Screws
Insert Batteries
INSERT BATTERIES
Chapter 1