Table of Contents
Advertisement
S
9
E C T I O N
term
D
R
EMOVING OR
I
NSTALLING THE
9.1
B
P
ASE
LATE ON
M
A
ULTILINE
T
ERMINAL
9.2
Installation Manual, Chapter 4 – Installing Dterm Series i Multiline Terminals
November 2003, A6-506000-642-01(8508), Release 6.0
Series i telephones come equipped with a base cover.
Removing the Base Plate
1. Extend the base plate to its fullest height.
2. Press the tabs as illustrated in Figure 4-18: Removing Base Plate, and
slide the base cover in the direction of the arrows until it clicks.
Figure 4-18: Removing Base Plate
Installing the Base Plate
1. Line up the four tabs on the base cover with their corresponding slots on
the telephone as illustrated in Section 9: Installing Base Plate on page 1-99.
2.
Slide the cover in the direction of the arrows until it clicks in place. Refer to
Section 9: Installing Base Plate on page 1-99.
Figure 4-19: Installing Base Plate
99
Advertisement
Table of Contents
