Connecting Ac Adapter; Installing Directory Card - NEC UNIVERGE DT920 Series User Manual

CONNECTING AC ADAPTER

1.
Insert the AC adapter plug into the connector of
the AC adapter on the back of telephone.
2.
Fix the AC adapter cord through the groove on
the back of telephone.
INSTALLATION PROCEDURE

INSTALLING DIRECTORY CARD

An optional directory card (also known as an abbreviated dialing
table) can be attached to the telephone sets. The directory card
can be used to record often dialed numbers or other important
information.
To remove the directory card, pinch both sides of the
directory card holder inward until the tabs release and pull
the holder out of the grooves.
1.
Attach the Directory Card to the Directory Card
Holder.
2.
Take the protective sheet off from the plastic
cover.
The surface of the plastic cover is put out.
3.
Push the Directory Card Holder into the grooves
on the terminal until they snap into place.
(1)
Plastic Cover
(2)
Directory Card
(3)
Directory Card Holder
(4)
Grooves
21
(1)
(2)
(3)
(2)
(4)