Removing The Main Thermistor; Removing The Sub Thermistor - Canon NP7160 Service Manual

CHAPTER 6 FIXING SYSTEM
3) Remove the mounting screw [2], and
detach the thermal switch assembly [3].

6. Removing the Main Thermistor

1) Remove the fixing assembly. (See p. 6-8.)
2) Remove the mounting screw [1], and free
the harness from the harness guide; then,
detach the main thermistor [2].

7. Removing the Sub Thermistor

1) Remove the fixing assembly. (See p. 6-8.)
2) Open the upper delivery assembly, and
insert a screwdriver into the hole [A] to
keep the upper delivery assembly from
closing.
3) As shown, pick the hook assembly with
pincers, and remove the tension spring
[1].
6–12
COPYRIGHT © 1998 CANON INC.
[2]
[3]
[2]
[1]
CANON NP7161/NP7160 REV.0 AUG. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
Figure 6-213
Figure 6-214
Figure 6-215
Figure 6-216
[1]
[A]