Removing The Sub Thermistor Th2) Unit - Canon NP6045 Service Manual

CHAPTER 6 FIXING SYSTEM
17. Removing the Sub Thermistor (TH2) Unit
1) Slide out the fixing/feeding unit.
2) Remove the screw
the screw , and remove the harness cover
3) Remove the screw
Note:
It is difficult to replace the sub thermistor on its own in the field. Be sure to replace
it on a unit basis (thermistor unit
6-32
COPYRIGHT © 1997 CANON INC.
, and remove the fixing assembly upper cover
Figure 6-231
, and remove the thermistor (TH2) unit
Figure 6-232
in Figure 6-232.)
CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
.
.
; then, remove