Duplex Pick-Up Solenoid; Removing The Duplex Pickup Solenoid; Registration Clutch; Removing The Registration Clutch - Canon LASER CLASS 810 Service Manual

Chapter 8

8.6.12 Duplex Pick-up Solenoid

8.6.12.1 Removing the Duplex Pickup Solenoid

1) Remove the rear cover, left middle cover, and left rear cover.
2) Remove the fan duct and main motor.
3) Remove the relay PCB and registration clutch.
4) Remove the pickup drive unit, main drive unit, and fixing/drive unit.
5) Remove the duplex pickup solenoid [1].
- Screw [1] 1pc.
When installing the duplex pickup solenoid, be sure to install the solenoid le-
ver [1] on the arm [2].

8.6.13 Registration Clutch

8.6.13.1 Removing the Registration Clutch

1) Remove the rear cover.
2) Remove the registration clutch [1].
- Connector [2] 1pc.
- E-ring [3] 1pc.
8-12
[1]
F-8-32
[2]
[1]
F-8-33
[2]
[1]
F-8-34
0017-3150

8.6.14 Main Motor

8.6.14.1 Removing the Main Motor

1) Remove the rear cover.
2) Remove the fan duct[1].
- Screw [2] 1pc.
3) Remove the main motor [3].
- Connector [4] 1pc.
- Screw [5] 3 pcs.
[4]
0017-3151
[1]
[2] [3]
F-8-35
[3]
[2] [1]
[5]
F-8-36
0017-3152