Procedure For Setting A Ftp Server As A Save Location - Canon imageCLASS MF746Cdw User Manual

Procedure for Setting a FTP Server as a Save Location

Before configuring the machine for scanning to FTP Server, check the setup flow shown below.
Setting Up
Make sure that the machine and the computer are correctly connected.
Connecting to a Wireless LAN(P. 20)
Connecting to a Wired LAN(P. 19)
Make sure that you have the following information:
● The IP address of the machine.
● FTP server name.
● Path to the FTP server and folder name.
● User name, password (only if set).
● If the path, folder name, user name, password, etc. for the FTP server are
unknown, contact you Network Administrator.
● To change the FTP port number.
Check whether you need to use PASV mode.
● If a firewall is installed between the machine and the FTP server, you must set
PASV mode. Configuring FTP PASV Mode(P. 75)
● Also make sure that <Use HTTP> and <Use Remote UI> are set to <On>.
Disabling HTTP Communication(P. 423)
Disabling Remote UI(P. 424)
Register the FTP server address.
Registering Destinations from Remote UI(P. 441)
99
Viewing Network Settings(P. 40)
Changing Port Numbers(P. 386)
3S1Y-01X