Table of Contents
Advertisement
7 Press Setup.
8 If prompted, log on with Administrator privileges: Enter the password, scroll down, and click Login.
The default Administrator password is Fiery.1 (case-sensitive).
Note: The Administrator login automatically times out after the time interval specified in setup. The default
timeout is 5 minutes. If the timeout message displays, scroll down and press OK.
After viewing or changing any settings on the tabs you can return to the main screen by pressing Cancel or Save
Changes.
Server setup options
To access Server setup options from the printer control panel, press the Main Menu button, press Show All, then
press Fiery > Tools > Setup > Server.
For more information, see
General
Specify general imagePRESS Server settings.
Server Name
Sets the name of the imagePRESS Server on the network (15 characters maximum).
Note: If you set up more than one imagePRESS Server, do not assign them the same name.
Server Comments
Provides optional information about the imagePRESS Server (64 characters maximum). Only alphanumeric
characters and the hyphen are allowed.
Workgroup or Domain
Specifies the name of the Workgroup or Domain.
Use Character Set
Specifies which character set to use to display file names on the printer control panel and in Command WorkStation.
This is important if file names include accented or composite characters (such as é or æ). For mixed-platform
networks, select the setting that gives the best overall representation of the special characters you use.
Note: Some characters may not display correctly if Macintosh is selected. To avoid this, use 1-byte characters for job
and user names.
Settings:
Access Setup from the printer control panel
Windows
Macintosh (default)
Configuration and Setup
Setting up from the printer control panel
on page 35.
36
Advertisement
Table of Contents
