Show Bgp {Summary {[Ipv4 | Ipv6 ] Unicast - D-Link xStack DGS-3620 Reference Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28PC:admin#
Command:show bgp flap_statistics
BGP local router ID is 172.29.232.182
Status codes: s suppressed, d damped, h history, * valid, > best, i –internal
Origin codes: i - IGP, e - EGP, ? – incomplete
Network
*d 10.0.0.0/16
*d 10.2.0.0/16
Total Entries :2
DGS-3620-28PC:admin#
12-48 show bgp
Description
This command is used to display BGP configuration and summary of the BGP status. If both the
IPv4 unicast and IPv6 unicast are not specified, summary information for the IPv4 unicast address
family will be displayed.
Format

show bgp {summary {[ipv4 | ipv6 ] unicast}}

Parameters
summary - (Optional) Specifies that the summary of the BGP status will be included in the
display.
ipv4 unicast - Specifies to display summary information for IPv4 unicast.
ipv6 unicast - Specifies to display summary information for IPv6 unicast.
Restrictions
None. (EI Mode Only Command)
Example
This example displays the BGP setting:
DGS-3620-28PC:admin#
Command: show bgp
BGP Global State
Version
BGP Router Identifier
Synchronization
Enforce First AS
Local AS number
Scan Time
show bgp flap_statistics
From Flaps
172.29.232.177 4
172.29.232.177 4
show bgp
: Disabled
: 4
: 10.90.90.90
: Enabled
: Enabled
: 100
: 60
216
Duration Reuse
00:13:31 00:18:10
00:02:45 00:28:20
Path
100 ?
100 i