Show Spanning-Tree Mst Port Summary; Show Spanning-Tree Mst Summary - D-Link DWL-8500AP Command Reference Manual

Port Path Cost The configured path cost for the specified interface.
Designated Root Identifier of the designated root for this port within the CST.
Designated Port Cost Path Cost offered to the LAN by the Designated Port.
Designated Bridge The bridge containing the designated port
Designated Port Identifier Port on the Designated Bridge that offers the lowest cost to the
Topology Change Acknowledgement Value of flag in next Configuration Bridge Protocol
Hello Time
Edge Port
Edge Port Status The derived value of the edge port status. True if operating as an edge
Point To Point MAC Status Derived value indicating if this port is part of a point to point
CST Regional Root The regional root identifier in use for this port.
CST Port Cost The configured path cost for this port.

show spanning-tree mst port summary

This command displays the settings of one or all ports within the specified multiple spanning
tree instance. The parameter
{ >
<slot/port
If you specify 0 (defined as the default CIST ID) as the
for one or all ports within the common and internal spanning tree.
Format
Modes
MST Instance ID The MST instance associated with this port.
Interface
Type
STP State
Port Role
Link Status
Link Trap

show spanning-tree mst summary

This command displays summary information about all multiple spanning tree instances in the
switch. On execution, the following details are displayed.
LAN
Data Unit (BPDU) transmission indicating if a topology change is in progress
for this port.
The hello time in use for this port.
The configured value indicating if this port is an edge port.
port; false otherwise.
link
.
indicates a particular MST instance. The parameter
<mstid>
indicates the desired switch port or all ports.
| all}
show spanning-tree mst port summary <mstid> {<slot/port> | all}
Privileged EXEC
User EXEC
Valid slot and port number separated by forward slashes.
Currently not used.
The forwarding state of the port in the specified spanning tree instance
The role of the specified port within the spanning tree.
The operational status of the link. Possible values are "Up" or "Down".
The link trap configuration for the specified interface.
2 Switching Commands
, the status summary displays
<mstid>
Spanning Tree Protocol (STP) Commands 51