SSANGYONG Y200 Manual page 2065

DI04-26
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
5. Remove the lower bolts at turbo charger oil return pipe.
Notice
Replace the steel gasket with new one.
Installation Notice
Tightening torque
Y220_04019
6. Remove the lower bolt at turbo charger bracket.
7. Remove the turbo charger bracket bolts.
Installation Notice
Tightening torque
Notice
Use only 12 1/2" wrench.
Y220_04020
8. Remove the bolts and nuts at the turbo charger and the
exhaust manifold.
Installation Notice
Tightening torque
Y220_04021
9. Remove the turbo charger assembly.
10. Install in the reverse order of removal.
Notice
• Replace the steel gasket with new one.
• To prevent gas leaks, tighten the fasteners with the
specified tightening torques.
Y220_04022
25 ± 2.5 Nm
32 ± 3.2 Nm
25 ± 2.5 Nm
EXHAUST SYSTEM
DI ENG SM - 2004.4