Exhaust Gas Recirculation Mounting: Removal - Refitting - Renault Laguna III Manual

Exhaust gas recirculation mounting: Removal - Refitting
K9K
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Remove the front engine cover.
a Disconnect the battery (see Battery: Removal - Re-
fitting) (MR 415, 80A, Battery).
a Remove:
- the engine undertray bolts,
- the engine undertray,
- the catalytic converter (see 19B, Exhaust, Cata-
lytic converter: Removal - Refitting, page 19B-
32) ,
- the exhaust gas recirculation rigid pipe (see 14A,
Antipollution, Exhaust gas recirculation rigid
pipe: Removal - Refitting, page 14A-62) ,
- the exhaust gas recirculation assembly (see 14A,
Antipollution, Exhaust gas recirculation as-
sembly: Removal - Refitting, page 14A-52) .
II - REMOVAL OPERATION FOR PART
CONCERNED
1 - Step for removing the exhaust gas recirculation
mounting on the gearbox side
a Remove the following on the workbench:
- the bolts (1) from the exhaust gas recirculation
mounting on the gearbox side,
- the exhaust gas recirculation mounting on the
gearbox side,
ANTIPOLLUTION
123967
14A-49
- the exhaust gas recirculation mounting seal on the
gearbox side.
If replacing the exhaust gas recirculation mounting
on the gearbox side
a Remove the exhaust gas recirculation solenoid
valve (see 14A, Antipollution, Exhaust gas recir-
culation solenoid valve: Removal - Refitting,
page 14A-11) .
a Remove:
- the bolts (2) from the exhaust gas intercooler cool-
ant circulation cover,
- the exhaust gas intercooler coolant circulation cov-
er,
- the exhaust gas intercooler coolant circulation cov-
er seals.
14A
114341