Command Syntax Statements; Command Prompts - HP ProCurve 6200yl Series Access Security Manual

Command Syntax Statements

Syntax: ip < default-gateway < ip-addr >> | routing >
Syntax: show interfaces [port-list ]
■ Vertical bars ( | ) separate alternative, mutually exclusive elements.
■ Square brackets ( [ ] ) indicate optional elements.
Braces ( < > ) enclose required elements.
■
■ Braces within square brackets ( [ < > ] ) indicate a required element within
an optional choice.
■ Boldface indicates use of a CLI command, part of a CLI command syntax,
or other displayed element in general text. For example:
"Use the copy tftp command to download the key from a TFTP server."
■ Italics indicate variables for which you must supply a value when execut­
ing the command. For example, in this command syntax, you must provide
one or more port numbers:
Syntax: aaa port-access authenticator < port-list >

Command Prompts

In the default configuration, your switch displays a CLI prompt similar to the
following:
ProCurve 5406zl#
ProCurve 5412zl#
ProCurve 3500yl#
ProCurve 6200yl#
To simplify recognition, this guide uses ProCurve to represent command
prompts for all models. For example:
ProCurve#
(You can use the hostname command to change the text in the CLI prompt.)
Getting Started
Conventions
1-3