Displaying Rip Redistribution Information; Displaying Rip Redistribution Filter (Restrict) Information - HP ProCurve 5300xl Series Management Manual

Displaying RIP Redistribution Information

To display RIP redistribution information, enter the show ip rip redistribute
command at any context level:
HPswitch# show ip rip redistribute
RIP redistributing
Route type Status
---------- --------
connected enabled
static enabled
Figure 11-7. Example of Show IP RIP Redistribute Output
RIP automatically redistributes connected routes which are configured on
interfaces that are running RIP, and all routes that are learned via RIP. The
router rip redistribute command, described on page 11-25, configures the
routing switch to cause RIP to advertise connected routes that are not running
RIP, and static routes. The display shows whether RIP redistribution is
enabled or disabled for connected and static routes.

Displaying RIP Redistribution Filter (restrict) Information

To display RIP restrict filter information, enter the show ip rip restrict command
at any context level:
HPswitch# show ip rip restrict
RIP restrict list
IP Address
--------------- ---------------
Figure 11-8. Example of Show IP RIP Restrict Output
The display shows if any routes, identified by the IP Address and Mask fields
are being restricted from redistribution. The restrict filters are configured by
the router rip restrict command described on page 11-25.
Mask
IP Routing Features
Configuring RIP
11-33