TDT RZ2 Manual page 78

1-72
Current Network Value
Current IP settings are displayed in this area.
Settings for configuring the static IP address, subnet mask, gateway address, and
MAC address are located in the "Network Settings" area.
Network Settings
This area contains settings for configuring the UDP interface in the event that no
DHCP server is detected. If the Enable DHCP check box is checked (see following
Parameters diagram), the "IP Address", "Subnet Mask", and "Gateway Address"
values are overridden and automatically configured by the DHCP server if available.
Note: These settings are reserved for connections that cannot locate a DHCP server. If no
DHCP server can be detected contact your network administrator for applicable
settings.
Parameters
This area contains settings for enabling DHCP or renaming the NetBIOS name.
To Change the NetBIOS name:
•
•
RZ-UDP Communications Interface
Type the desired NetBIOS name in the NetBIOS name textbox and click the
Update button.
or
Type the desired NetBIOS name in the NetBIOS name textbox and click the
Update and Reset button.
System 3