TDT RZ2 Manual page 220

6-12
Waveform Display Screen
The Waveform Display screen is displayed by touching the
existing logical amplifier on the Main Configuration Option screen. The plot label
includes the logical amplifier number, amp type, and voltage and time scales. The
displayed waveform is decimated for plotting and high pass filtered so all channels
can be shown on the same voltage scale. If the logical amplifier is DC Coupled, the
DC offset is displayed as a value on the right side of each plot line (in mV). The
screen view can be adjusted using touchscreen options.
To view a different subset of channels:
•
To change the y-axis scale:
•
To view more or fewer channels:
•
To change the time scale:
•
PZ5 NeuroDigitizer
Swipe up or down on the left side of the screen. (A)
Swipe up or down in the center of the screen. (B)
Swipe down or up on the right side of the screen. (C)
Swipe left or right on the bottom of the screen. (D)
System 3
Preview icon on an