TDT RZ2 Manual page 439

System 3
G Common/Ground Connection
R Reference Connection
Note: The 16-channel headstage does not have any pins connected on the right side of
the headstage; the Hirose connector is there for mechanical support. See Hirose
specification for recommended footprint.
Hirose Connectors:
ZCD16 - DF30FC-20DS-0.4V x 1
ZCD32 - DF30FC-20DS-0.4V x 2
64‐Channel Headstage Pinouts
Images are not to scale. Pinouts are looking through the headstage shell (or into a
matching board connector). All board dimensions are in millimeters and are identical
for both sides, board thickness is 0.75 mm, and connectors are centered as shown.
Square Guide
Right
Left
ZIF-Clip® ZCD Digital Headstages
10-25