TDT RZ2 Manual page 684

18-26
Controlling the PM2R with WordOut:
In this example a WordOut is used to control the PM2R (via an RP2.1) from within
RPvdsEx. This simplified format decreases cycle usage. An additional iScaleAdd is
required because the BitOut and WordOut components function differently and should
not be used in the same circuit. As before, a software trigger initiates the start of
the stimulus presentation. The triggered signal adds 64 to the output to change the
channel.
Channel Selec
Controlling the PM2R from a run‐time application:
The examples described here could easily be modified to allow control from run-time
applications. Parameter tags can be included and used in other applications such as
BioSigRP or OpenEx.
PM2Relay Power Multiplexer
[1:4,0]
ConstI
K=0
Device Selec
= 0 = 0
[1:1,0]
Src=Soft1
[1:12,0]
Tone
Amp=1
Shft=0
Freq=1000
Phse=0
Rst=Run
[1:9,0]
TTLDelay
ToneOut
Tdel=1
[1:5,0] [1:6,0]
iScaleAdd iScaleAdd
SF=1 SF=1
Shft=0 Shft=0
[1:2,0]
TTL2Int
HiVal=64
ToneOut
[1:13,0]
Cos2Gate
[1:10,0]
Trf=10
Schmitt
Ctrl=Closed
Thi=100
Tlo=10
System 3
[1:7,0]
M=-1
W
cO
Ch=1
[1:14,0]