TDT RZ2 Manual page 444

10-30
Finally, secure the lock pin to the headstage holder.
ZIF-Clip® Headstage Holders
Gently slide the headstage onto the
holder (with probe or adapter already
connected).
Position the headstage holder between
the cables of the ZIF-Clip®
headstage. The headstage should be
completely secured in the holder.
To remove, grip the top and bottom of
the headstage and gently slide the
holder away.
The U-shaped lock pin secures the
connection and prevents the ZIF-Clip®
from opening and releasing the probe.
System 3