TDT RZ2 Manual page 402

8-34
Track Specifications
The Track Specifications area of the Settings dialog box displays details of the
current map configurations and can be used to edit and/or enter configurations in a
text format.
An example is displayed in the commented text (the lines begin with '#') to provide
some description of the structure. Targets can be refined here more precisely than in
the GUI. This method is recommended for users who are very familiar with the
system and scripting. In general, it is easiest to use the GUI to design the tracking
algorithm and visit the Track Specifications textbox later if necessary.
Menu and Toolbar Reference
Menus
File Menu
New
Open
Close
Save
Save As
Load Image
Load Image from RV2 Load a snapshot image from a connected camera. If a
Send Config to RV2
Use Configs
Purge Configs
RVMap Software for RV2
Open a new RV Map file.
Launch the Load RV Map File dialog box.
Close the application.
Save changes to the current RV Map File or launches the
Save RV Map file.
Launch the Save RV Map file.
Launch the Specify Image File and enable the user to load
a saved snapshot image.
default hardware device has not been previously defined, the
Load Image From dialog box is launched to prompt hardware
selection.
Send the current configuration to the RV2. If a default
hardware device has not been previously defined, the Send
Config To dialog box is launched to prompt hardware
selection.
Retrieve a list of available configuration on the RV2 and
allow the user to select a configuration. If a default hardware
device has not been previously defined, the Use Config On
dialog box is launched to prompt hardware selection.
Delete the previously saved configurations on the RV2. If a
default hardware device has not been previously defined, a
dialog box is launched to prompt hardware selection.
System 3