TDT RZ2 Manual page 399

System 3
6. Click OK.
Saving Configurations
The configuration is saved to an RVMap file (*.rvm).
To save the map file:
1.
2. Browse to the desired location, type a name in the File name box, and
To upload to an RV2:
1.
2. If prompted, select the hardware.
3. In the Create/Replace Config dialog box, enter a name in the New Config
4. Verify that the new config is listed as the Current Config on the Live tab of
Scale/Offset Objects
The entire map can be scaled or offset using the Scale/Offset Object tools. These
tools simplify adjustments to the map that may be required if the distance or
placement of the camera has changed since the map was configured.
Click the File menu and click Save As.
click Save.
Click the File menu and click Send Config to RV2.
or
Click the button on the toolbar.
Name box and click Send.
the RV2 interface.
You are now ready to begin your OpenEx recording.
8-31
RVMap Software for RV2