TDT RZ2 Manual page 644

System 3 series. rz z series
Table of Contents

Advertisement

17-26
Important!
The two External Power Molex connectors on the top panel are shorted together; do
not use more than one external power source. The second external power connector
can be used to jumper the external power source to another BH32
Voltage Mode Toggle
This back panel switch toggles between 5 V and external power supply source for all
Molex output banks. Use 5 V mode for connections to mains power or PoE. Use
External Voltage mode for other external power sources up to 30 V.
Power Switch
The On/Off toggle switch turns the BH32 power off or on. The LED display will be
illuminated when the power is on.
Status Display
The front panel display screen reports system status. The Mode button to the left
toggles the display modes.
The display modes include:
1.
2. Bank Status - bank direction and current state of all bits in each bank
3. NetBIOS name and IP address:
4. IP address of paired RZ device (if paired). See "RZ Configuration" on
Push and hold the Mode button for two seconds then release to automatically cycle
through all of the display items, displaying each for one second.
Push and hold the Mode button for 10 seconds to reset the Device Number.
I/O Control
The BH32 is a net appliance that was designed to be used under a variety of
conditions, not all of which are available from vendors of behavioral control systems.
At the most basic the TDT BH32 system can replace existing devices such as the
Med Associates, Colburn or Lafayette systems that interface to a standard operant or
behavioral box with input and output lines, where the output lines drive feeders, lick
meters and other devices that require more than a digital trigger. At the more
complex level the TDT system can be used to send and receive complex signals to
control multiple hardware devices.
BH32 Behavioral Cage Controller
Power Source
Mains power
PoE
External power up to 30 V
Device Number - how the BH32 is recognized on the network by other
devices
page 17-30.
Mode
Max Total Output
5 V
200 mA
5 V
100 mA
External Voltage
3 A
System 3

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for TDT RZ2

Table of Contents